Airtac SE100 Standard Air Cylinder SE100X260
The AirTAC Airtac SE100 Standard Air Cylinder SE100X260 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 260mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke260 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X260
The AirTAC SE100X260 is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up valuable surrounding space.
This 100 mm bore unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw to soften hard impacts at high cycle speeds. Note that this specific SKU is supplied without a magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE100 Standard Air Cylinder SE100X260 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X260 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X260
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X260 Is Used
Injection Mold Extraction
Provides the 3927 N push force needed to positively eject dense plastic parts from injection molding dies during automated unloading cycles.
Automotive Press Feeding
Handles heavy sheet metal blanks into multi-stage stamping presses, utilizing the 260 mm stroke to clear bulky tooling before the next stroke.
Industrial Component Straightening
Applies controlled, high-tonnage clamping pressure to bend and align structural steel frames or heavy machined components in fabrication cells.
Is the Airtac SE100 Standard Air Cylinder SE100X260 the Right Cylinder?
Generating 3927 N of push force at 0.5 MPa, this 100 mm bore actuator sits between the 80 mm model (2513 N push) and the 125 mm model (6136 N push), letting you step down for lighter duties or up for heavier loads. Remember that a standard SE cylinder relies on live air pressure to hold its load; if air is lost or the valve centers, the piston will drift, so applications requiring true position holding without live pressure should integrate an external rod lock or pilot-operated check valve.
With a 260 mm stroke, the 25 mm piston rod and M20x1.5 thread face potential bending stresses under lateral loads. For this stroke length and beyond, always use an external guide to prevent rod-bearing damage. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, utilizing the standard PT1/2 port and shared mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X260 FAQ
At 0.5 MPa, the SE100X260 generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa, operating within a 0.15-1.0 MPa pressure range.
This specific SE100X260 SKU lacks the built-in magnet (-S), so it cannot host CMSE or DMSE position sensors without modification. The cylinder features field-adjustable air cushions at both ends, allowing you to tune the needle screw to actively decelerate the piston near stroke end rather than relying on a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X260
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.