Airtac SE100 Standard Air Cylinder SE100X260S
The AirTAC Airtac SE100 Standard Air Cylinder SE100X260S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 260mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke260 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X260S
The AirTAC SE100X260S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty motion tasks. It delivers a substantial 3927 N push force at 0.5 MPa and utilizes a PT1/2 port paired with a Ø25 mm rod. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This 100 mm bore unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. To absorb kinetic energy at high cycling speeds, the cylinder features field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration and eliminate hard metal impacts.
Airtac SE100 Standard Air Cylinder SE100X260S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X260S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X260S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X260S Is Used
Injection Mold Clamping
Provides 3927 N of push force at 0.5 MPa to secure heavy injection mold halves during material injection cycles.
Pallet Diverters
Uses the 260 mm stroke to push loaded pallets onto secondary packaging lines, absorbing kinetic energy via adjustable cushions.
Hydraulic Press Ejection
Ejects dense stamped metal blanks from hydraulic presses, relying on the Ø25 mm rod to withstand high off-center loads.
Is the Airtac SE100 Standard Air Cylinder SE100X260S the Right Cylinder?
Selecting this 100 mm bore provides 3927 N of push force at 0.5 MPa, bridging the gap between the 63 mm bore (1559 N push) and the larger 125 mm bore (6136 N push). At 260 mm stroke, the extended Ø25 mm piston rod carries significant side-load potential; for unsupported lengths of 300 mm or more, an external guide bearing is strongly recommended to prevent rod-bearing bending and premature seal wear.
As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for competing ISO 15552 cylinders, sharing standardized mounting accessories. Note that this plain double-acting cylinder will drift if air pressure is lost or a valve centers; if the application must hold a vertical load without live pressure, specify a BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X260S FAQ
At 0.5 MPa, it delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100X260S is dimensionally interchangeable per ISO 15552 standards, meaning it shares standardized mounting and body dimensions with other ISO 15552 profile cylinders for direct retrofits. The built-in -S magnet also ensures compatibility with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X260S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.