Airtac SE100 Standard Air Cylinder SE100X262SN
The AirTAC Airtac SE100 Standard Air Cylinder SE100X262SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 262mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke262 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X262SN
The AirTAC SE100X262SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Driven by a 100 mm bore and 262 mm stroke, it operates at speeds from 30 to 800 mm/s.
This unit features a square extruded aluminum barrel without external tie rods, which streamlines mounting flush against machine frames and resists corrosion. The included -S magnet enables position detection via AirTAC CMSE reed or DMSE electronic sensors, while the NBR seal handles standard industrial temperatures reliably. Field-adjustable air cushions at both ends allow you to tune deceleration and soften hard end-stops dynamically.
Airtac SE100 Standard Air Cylinder SE100X262SN Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X262SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 262 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X262SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×262 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X262SN Is Used
Injection Mold Clamping
Provides 3927 N of extend force at 0.5 MPa to secure mid-sized injection mold halves, utilizing the 262 mm stroke to clear the tooling during part ejection.
Press Brake Tonnage
Supplies steady pneumatic thrust for light-duty press bending operations, where the adjustable end-cushioning absorbs kinetic energy and prevents shock at stroke completion.
Pallet Lift Gates
Raises and lowers heavy palletizing gates using its 262 mm travel, with the NBR seal ensuring consistent operation in dusty ambient warehouse environments.
Is the Airtac SE100 Standard Air Cylinder SE100X262SN the Right Cylinder?
Stepping down from this 100 mm bore (3927 N push @0.5 MPa) to the 80 mm size drops the output to 2513 N, whereas moving up to the 125 mm bore increases thrust to 6136 N. Because this is a 262 mm stroke, the 25 mm rod and M20x1.5 thread carry significant side-load potential; for heavy offset loads, integrate an external guide to prevent rod-bearing bending. Remember that a standard SE cylinder does not hold position when air is exhausted—add a BSE rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement sharing identical mounting footprint and PT1/2 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X262SN FAQ
The SE100X262SN delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, and the maximum push force is 801 kgf at 1.0 MPa. It features a 100 mm bore, 262 mm stroke, PT1/2 port, and a 25 mm rod with an M20x1.5 thread.
Yes, the SE profile is dimensionally interchangeable per ISO 15552 standards, meaning it serves as a drop-in replacement for other ISO 15552 cylinders. However, it does not hold its position or load when air is lost or exhausted; for fail-safe load holding, use an AirTAC BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X262SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.