Airtac SE100 Standard Air Cylinder SE100X50
The AirTAC Airtac SE100 Standard Air Cylinder SE100X50 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke50 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X50
The AirTAC SE100X50 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a completely flush body that resists corrosion and mounts cleanly in confined machinery spaces.
This 100mm bore unit features field-adjustable air cushioning at both ends to decelerate the piston smoothly over its 36mm cushion length. Note that this specific SKU lacks a built-in magnet, meaning it will not directly host CMSE or DMSE position sensors without modification.
Airtac SE100 Standard Air Cylinder SE100X50 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X50 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X50
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X50 Is Used
Hydraulic Press Die Handling
Uses the 3927 N extend force to shuttle heavy stamping dies in and out of a hydraulic press over the 50mm stroke.
Injection Mold Ejection
Provides high-force ejection of molded plastic parts from the cavity, utilizing the 801 kgf maximum push capacity.
Metal Forming Clamp
Secures thick sheet metal blanks in a forming jig, relying on the 25mm rod diameter to resist bending under side loads.
Is the Airtac SE100 Standard Air Cylinder SE100X50 the Right Cylinder?
Select this 100mm bore when an 80mm cylinder (2513 N push at 0.5 MPa) is insufficient for your load. If you require less force, stepping down to the 80mm bore saves space, while stepping up to the 125mm bore provides 6136 N for extreme loads. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure drops; for position holding, consider the BSE rod lock variant. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing standard mounting and PT1/2 port interfaces.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X50 FAQ
At 0.5 MPa, the SE100X50 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N, with an absolute maximum push of 801 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing ISO 15552 mounting hardware. However, this specific SKU does not include a built-in magnet (-S), so it cannot host CMSE reed or DMSE electronic sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.