The AirTAC AirTAC SE100X280S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 280mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X280S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 3927 N of push force at 0.5 MPa and features a 280 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine frames.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable air cushions at both ends allow you to tune deceleration and soften hard end stops at high cycling speeds.
| Model | AirTAC SE100X280S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy flap mechanisms on palletizing lines, utilizing the 3927 N push force to overcome carton resistance during 280 mm travel.
Provides steady ejection force for plastic injection molds, using the integrated magnet for DMSE electronic timing confirmation.
Actuates sorting gates on heavy-duty timber conveyors, where the adjustable cushion absorbs the kinetic energy of fast 280 mm strokes.
Stepping down to the 80 mm bore drops the 0.5 MPa push force to 2513 N, while moving up to the 125 mm bore increases it to 6136 N. As a true ISO 15552 cylinder, this model serves as a drop-in dimensional replacement for other ISO 15552 profile cylinders, matching the 100 mm bore, 280 mm stroke, PT1/2 port, and standardized mounting hardware. Because the 280 mm stroke creates leverage that risks rod-bearing bending under high side loads, utilizing an external guide is recommended for unsupported payloads.
Quick checklist
The SE100X280S delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, and the maximum push force is 801 kgf at 1.0 MPa.
No, the SE100X280S is a double-acting cylinder and cannot hold position without live pressure. The adjustable air cushion only decelerates the piston near stroke end; for load holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.