The AirTAC AirTAC SE100X285S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 285mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X285S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa, scaling to 5497 N at 0.7 MPa, making it ideal for high-load industrial machinery.
Its square extruded aluminum barrel eliminates external tie rods, offering a compact, corrosion-resistant footprint that mounts flush. The built-in -S magnet integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while field-adjustable air cushions at both ends allow you to tune deceleration for fast 30-800 mm/s cycles.
| Model | AirTAC SE100X285S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 285 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×285 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Supplies the 3927 N push force required to knock heavy plastic injection molded parts off core pins during automated ejection sequences.
Acts as a heavy-duty stop gate in high-mass pallet conveyor lines, using its 285 mm stroke to raise and lower the barrier securely.
Drives bearings or pins into housings on automated press lines, utilizing the adjustable end cushions to soften hard stops at high speeds.
At 100 mm bore, this model provides 3927 N push at 0.5 MPa. If your load is lighter, the 80 mm bore offers 2513 N push; if you need more power, stepping up to the 125 mm bore yields 6136 N push. Because this is a non-locking cylinder, the piston will drift if air pressure drops—use a BSE rod lock for strict position holding. For a 285 mm stroke, the unsupported rod length increases bending risk on the M20x1.5 thread and front bearing; always specify an external guide to prevent side-load wear. As a true ISO 15552 cylinder, it drops in for any standard 100 mm bore, 285 mm stroke, PT1/2 port application.
Quick checklist
The SE100X285S delivers 3927 N push and 3681 N pull at 0.5 MPa, and 5497 N push at 0.7 MPa, with a maximum push force of 801 kgf at 1.0 MPa. It uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread.
Yes, the SE100X285S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders of the same bore and stroke, retaining your existing mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.