The AirTAC AirTAC SE100X290S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 290mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X290S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic actuation. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, peaking at 801 kgf under 1.0 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
Because this specific configuration includes the built-in -S magnet, it is fully primed for non-contact position sensing using AirTAC CMSE reed switches or DMSE electronic sensors. The cylinder also integrates field-adjustable air cushioning at both ends, allowing technicians to dial in the exact needle setting to soften hard end-stops during high-velocity 290 mm strokes. The 36 mm cushion length ensures smooth kinetic energy absorption right at the stroke terminus.
| Model | AirTAC SE100X290S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Providing 3927 N of push force at 0.5 MPa, this cylinder reliably pushes heavy molded plastic parts out of stationary injection molding cavities during the unloading cycle.
Delivers substantial clamping pressure to hold heavy-gauge sheet metal components firmly in place beneath a hydraulic press brake during precision bending operations.
The 290 mm stroke extends to push fully loaded pallets from high-throughput packaging line conveyors onto an automated staging carousel for downstream sorting.
Generating 3927 N of push at 0.5 MPa, this 100 mm bore is a heavy-hitter; if your load requires less force, stepping down to the 80 mm bore yields 2513 N, while moving up to the 125 mm bore provides 6136 N for massive resistance. When replacing an existing ISO 15552 cylinder, verify the 100 mm bore, 290 mm stroke, PT1/2 port, and your specific mounting accessory. Remember that a plain SE cylinder will drift if air pressure is lost or the valve centers, so a BSE rod lock variant is required for secure load holding.
With a 290 mm stroke, the 25 mm piston rod experiences bending moments under heavy lateral loads. To prevent premature rod-bearing wear, always guide the load externally rather than relying on the cylinder to absorb side thrust.
Quick checklist
The SE100X290S generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It features a PT1/2 port and a 25 mm rod with an M20x1.5 thread.
Yes, the SE100X290S is dimensionally interchangeable per ISO 15552 standards, allowing it to drop directly into existing footprints. The included -S magnet also enables seamless integration with AirTAC CMSE or DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.