The AirTAC AirTAC SE100X30 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 30mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X30 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push force at 0.5 MPa, making it well-suited for high-impact operations. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This 100mm bore unit features a 30mm stroke and a PT1/2 port. Field-adjustable air cushions at both ends allow technicians to fine-tune end-of-stroke deceleration, softening hard mechanical stops during rapid 30-800 mm/s cycling. This specific SKU lacks a built-in magnet, meaning position sensing is not supported without physical modification.
| Model | AirTAC SE100X30 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push at 0.5 MPa required to close and form small metal brackets within a hydraulic press die-set.
Cycles at 30-800 mm/s to fold heavy corrugated cardboard flaps on a palletizer line, utilizing the 30mm stroke for rapid clamping.
Drives an injection mold ejector plate, using the adjustable end cushions to decelerate the 100mm piston smoothly before the stroke end.
Selecting this 100mm bore provides 3927 N of push force at 0.5 MPa. If your assembly requires less force, stepping down to the 80mm bore yields 2513 N push, whereas scaling up to the 125mm bore provides 6136 N. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; the piston will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. To match an existing ISO 15552 footprint, verify the 30mm stroke, PT1/2 port, and mounting accessory.
Quick checklist
At 0.5 MPa, the SE100X30 generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa.
Yes, the SE100X30 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing ISO 15552 mounting hardware and match the PT1/2 port without altering the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.