The AirTAC AirTAC SE100X300CA ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 300mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X300CA is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while simplifying external accessory attachment.
This 100 mm bore unit utilizes a PT1/2 port and a 25 mm piston rod to handle high dynamic loads. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during rapid 30-800 mm/s cycling. Note that this specific SKU omits the position-sensing magnet, so it operates without electronic or reed switch feedback.
| Model | AirTAC SE100X300CA ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Supplies the 5497 N push force at 0.7 MPa required to secure heavy injection mold halves within a 300 mm closure distance.
Leverages the CA clevis mount to articulate smoothly while feeding empty pallets into a high-speed packaging line.
Utilizes the 36 mm adjustable air cushion to decelerate the 25 mm rod safely when ejecting dense metal stampings at high speeds.
Selecting this 100 mm bore makes sense when your application requires substantial thrust, such as the 3927 N push at 0.5 MPa or 5497 N at 0.7 MPa. If your load demands less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa; conversely, moving up to the 125 mm bore provides a 6136 N push at 0.5 MPa for heavier payloads. The integrated CA single clevis mount is ideal for pivoting articulating linkages.
Because this model features a 300 mm stroke, the extended 25 mm rod generates increased bending moments on the front bearing during side-loaded conditions—an external guide rail is strongly recommended to prevent premature seal wear. Furthermore, a plain SE cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift, so apply a BSE rod lock for fail-safe vertical holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders using the same CA mounting footprint.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes. The SE100X300CA is dimensionally interchangeable per ISO 15552, meaning it shares the same mounting interface and center distances as other standard profile cylinders. You can drop it into existing machinery using the same CA clevis accessories without modifying the frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.