The AirTAC AirTAC SE100X30S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 30mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X30S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a substantial 3927 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This design simplifies retrofitting into existing ISO 15552 footprints without custom brackets.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30 mm strokes.
| Model | AirTAC SE100X30S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Short 30 mm stroke provides rapid 3927 N ejection force to strip stamped sheet metal parts from press dies without overtravel.
Applies 3681 N of retract pull force to securely clamp and fold heavy corrugated carton flaps during high-speed packaging lines.
Utilizes the 801 kgf maximum thrust to lock lightweight injection mold halves in place, using the compact profile body for tight machine cells.
Selecting the SE100X30S is ideal when your application requires high force in a very short stroke. If you need less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa. If you require even greater thrust, the 125 mm bore provides a 6136 N push at 0.5 MPa. Because this is a standard 100 mm bore with a 30 mm stroke, side-loading on the 25 mm rod is minimal compared to longer travels.
As a double-acting cylinder, the SE100X30S relies on continuous air pressure to hold its position. If air is lost or the valve centers, the piston will drift. For applications that must hold a load mechanically without live pressure, consider the BSE series with an integrated rod lock. For drop-in replacements, verify the PT1/2 port thread and standard mounting accessories to ensure a seamless ISO 15552 swap.
Quick checklist
At 0.5 MPa, the SE100X30S provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf when operating at the 1.0 MPa pressure limit.
No, the adjustable air cushion only decelerates the piston near the stroke ends and does not act as a brake. If air pressure is lost, the piston will drift. You must maintain live air pressure or use a BSE series cylinder with a rod lock for secure load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.