The AirTAC AirTAC SE100X310 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 310mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X310 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, generating a substantial 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that resists corrosion and mounts flush against machine frames.
This 100 mm bore unit features a PT1/2 port and a 25 mm hard-chrome rod with an M20x1.5 thread. Because this SKU lacks the -S magnet code, it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when moving heavy loads across the 310 mm travel.
| Model | AirTAC SE100X310 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 310 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Supplies the robust 3927 N push force required to eject dense plastic parts from injection molding platens, utilizing the 310 mm stroke to fully clear the mold cavity.
Actuates heavy-duty diverters on automated pallet conveyors, where the 100 mm bore provides the necessary muscle to reposition loaded pallets without hesitation.
Pushes heavy steel billets into the heating chamber of a hydraulic press, relying on the adjustable end cushions to stop the 310 mm stroke smoothly under high inertia.
Choosing this 100 mm bore makes sense when your application requires the 3927 N push at 0.5 MPa (or 5497 N at 0.7 MPa) that this model provides. If you need less force and a smaller footprint, stepping down to the 80 mm bore yields 2513 N of push. Conversely, if your payload demands more power, the 125 mm bore offers 6136 N.
At 310 mm of stroke, the unsupported rod length increases bending moments on the front bearing cap; for heavy off-center or side-loaded masses, incorporating an external guide rail prevents premature seal wear. This cylinder is dimensionally interchangeable per ISO 15552, meaning it serves as a direct drop-in replacement for other ISO 15552 cylinders sharing the same 100 mm bore, 310 mm stroke, and PT1/2 porting. Remember that the adjustable air cushion only decelerates the piston near stroke end—it is not a locking device. If the machine loses air pressure, the rod will drift, so specify a BSE rod lock variant for critical load-holding safety.
Quick checklist
At 0.5 MPa, the SE100X310 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100X310 is a true ISO 15552 profile cylinder, making its mounting dimensions fully interchangeable with other ISO 15552 cylinders of the same bore and stroke. It uses a PT1/2 port and features an extruded aluminum body without external tie rods for a clean, compact retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.