The AirTAC AirTAC SE100X310S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 310mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X310S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Driven by filtered air, it operates at pressures from 0.15-1.0 MPa and features a PT1/2 port paired with a 25 mm hard-chrome rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting environmental contamination.
This 100 mm bore unit integrates a built-in magnet for CMSE reed and DMSE electronic position sensing, ensuring accurate end-of-stroke verification. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, softening impacts when moving heavy loads at speeds up to 800 mm/s. It is a direct, dimensionally interchangeable drop-in replacement for any ISO 15552 cylinder, streamlining procurement and retrofits.
| Model | AirTAC SE100X310S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 310 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N extend force to eject heavy stamped metal parts from press dies, relying on the 310 mm stroke to clear the lower bolster completely before the transfer arms move.
Pushes 1000 kg loaded pallets off a high-speed packaging conveyor, utilizing the adjustable end cushions to soften the 800 mm/s impact at the 310 mm stroke terminus.
Actuates a heavy-duty swing clamp on a machining center fixture, where the built-in magnet triggers a DMSE sensor to confirm the clamp is fully retracted before the CNC door opens.
Selecting this 100 mm bore provides 3927 N of push force at 0.5 MPa, bridging the gap between the 63 mm bore (1559 N push) and the 125 mm bore (6136 N push). If your application requires less energy, stepping down to the 63 mm variant saves space and air consumption; if you need to move heavier masses, stepping up to the 125 mm cylinder provides 6136 N. Because the 310 mm stroke places extended leverage on the rod bearing, an external guide is strongly recommended to prevent side-load bending and premature seal wear.
As a standard ISO 15552 cylinder, the SE100X310S matches the standardized mounting footprint of competing brands, allowing you to reuse existing FA front flanges or LB foot brackets. The integrated -S magnet supports AirTAC CMSE and DMSE sensors without external hardware. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold a load. If your system loses air, the rod will drift, requiring a BSE rod lock for true position holding.
Quick checklist
At 0.5 MPa, the SE100X310S provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X310S is dimensionally interchangeable with all ISO 15552 profile cylinders, matching standard mounting and port dimensions. It features a built-in magnet for CMSE and DMSE sensors and adjustable air cushions at both ends to tune deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.