The AirTAC AirTAC SE100X325 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 325mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X325 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a substantial 3927 N push force at 0.5 MPa and up to 5497 N at 0.7 MPa, making it well-suited for high-load actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames.
This 100 mm bore unit utilizes a PT1/2 port and a Ø25 mm piston rod with an M20x1.5 thread. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, effectively softening hard impacts at high cycling speeds. Note that this specific SKU lacks a built-in magnet, so it is not equipped for CMSE or DMSE position sensing out of the box.
| Model | AirTAC SE100X325 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to index heavy corrugated cases onto a palletizing station, leveraging the 325 mm stroke for full travel.
Delivers reliable stripping force to eject large molded plastic parts from heavy tooling, utilizing the adjustable cushion to soften the retraction stop.
Actuates the mechanical gap adjustment on metal rolling mills, where the M20x1.5 rod end and 100 mm bore handle the high torque resistance.
Generating 3927 N of push at 0.5 MPa, this 100 mm bore cylinder sits between the 80 mm option (2513 N push) and the 125 mm class (6136 N push), allowing you to step up or down depending on your exact load requirements. Because it is a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessories like FA front flanges or TC trunnions.
With a 325 mm stroke, the unsupported rod length increases the risk of rod-bearing bending under heavy lateral loads; utilizing an external guide rail is highly recommended to prevent premature wear. Remember that a standard SE cylinder does not hold its position if air pressure drops or the valve centers—the piston will drift. For load-holding safety, consider the BSE rod lock variant.
Quick checklist
The SE100X325 generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE100X325 is a profile cylinder built to the ISO 15552 / VDMA 24562 standard, making it dimensionally interchangeable with other ISO 15552 cylinders. You can reuse existing mounting hardware and footprint dimensions without modifying your machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.