The AirTAC AirTAC SE100X330 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 330mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X330 is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features an extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush on machinery. Delivering a robust 3927 N of push force at 0.5 MPa, this 100mm bore unit drives heavy industrial loads with precision.
Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a set screw, protecting heavy moving masses from harsh impacts. This specific SKU is configured without a built-in magnet, meaning it lacks onboard position sensing out of the box. For automated sequencing, adding CMSE or DMSE switches requires a magnet-equipped variant.
| Model | AirTAC SE100X330 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N extend force to positively push heavy corrugated cartons onto palletizing lanes at the end of a packaging line.
Provides the 3681 N retract force needed to pull heavy ejector plates or stripper assemblies back to the home position on large molding tools.
Relies on the 330mm stroke to position heavy-gauge steel backstops accurately on a press brake bed for repeatable bending angles.
Stepping down to the 80mm bore reduces the 0.5 MPa push force to 2513 N, while moving up to the 125mm bore increases it to 6136 N, giving you clear sizing boundaries for this 3927 N class. Because this model lacks a rod lock, it cannot hold a vertical load or maintain position if air pressure is lost or the valve is centered; a BSE variant or external pilot-operated check valve is required for fail-safe holding. At 330mm of stroke, the Ø25mm rod and M20x1.5 thread carry substantial side loads, but long unsupported strokes induce rod-bearing bending—always use an external guide to prevent premature seal wear. As a true ISO 15552 profile cylinder, it offers a drop-in replacement footprint for standardized mounting hardware.
Quick checklist
The SE100X330 has a 100mm bore and uses a PT1/2 port. It generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. The rod is Ø25mm with an M20x1.5 thread.
Yes. The SE100X330 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, sharing the exact same mounting interface and hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.