The AirTAC AirTAC SE100X332SN ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 332mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X332SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa and utilizes a 332 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes. This specific configuration includes a built-in magnet for position sensing and NBR seals for reliable standard temperature operation.
Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, preventing hard mechanical impacts during high-speed cycling. Because this is a non-standard 332 mm stroke, it is manufactured as a made-to-order unit to precisely fit unique automated machinery travel requirements.
| Model | AirTAC SE100X332SN ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 332 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×332 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push at 0.5 MPa needed to positively index heavy filled cartons onto a palletizing conveyor during continuous packaging operations.
Delivers 5497 N of extend force at 0.7 MPa to actuate a light-duty press brake for forming thin sheet metal enclosures across the 332 mm travel.
Utilizes the adjustable end cushions to gently decelerate a heavy 100 mm bore mold extraction arm, preventing shock damage when pulling parts from injection machinery.
When sizing this 100 mm bore actuator, compare its 3927 N push at 0.5 MPa against adjacent bores. Stepping down to an 80 mm cylinder reduces the push to 2513 N, while stepping up to a 125 mm bore increases it to 6136 N. As a drop-in ISO 15552 replacement, this model matches standard 100 mm bore dimensions, utilizes a PT1/2 port, and the integrated -S magnet supports AirTAC CMSE (reed) and DMSE (electronic) switches.
Given the 332 mm stroke exceeds the 300 mm threshold, the unsupported piston rod is highly susceptible to bending under lateral loads. Designers must incorporate an external linear guide to prevent rod-bearing damage and premature seal wear. Remember that a standard SE cylinder cannot hold a load if air pressure is lost; for static holding, consider a BSE rod lock variant.
Quick checklist
This 100 mm bore cylinder features a PT1/2 port and generates 3927 N push and 3681 N pull at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with an absolute maximum push of 801 kgf at 1.0 MPa.
Yes, its standardized ISO 15552 mounting dimensions make it a drop-in retrofit for other profile cylinders of the same bore. However, it cannot hold a load without live air pressure; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.