The AirTAC AirTAC SE100X350CAY ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X350CAY is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a robust 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and a 350 mm stroke to drive demanding loads. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly to machine frames.
This unit features a CA single clevis mounting accessory and a PT1/2 port. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting machinery from hard impacts. Note that this SKU lacks a built-in position-sensing magnet, operating purely as a drive actuator.
| Model | AirTAC SE100X350CAY ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the 5497 N push force at 0.7 MPa, this cylinder strokes 350 mm to index heavy corrugated cases onto a palletizing conveyor, using the CA clevis to accommodate the slight articulation of the transfer arm.
The 100 mm bore provides the high thrust necessary to positively eject dense plastic components from an injection mold cavity, while the adjustable cushion absorbs the kinetic energy of the 350 mm travel.
Used in a robotic welding cell, the cylinder shifts heavy chassis subframes into the weld fixture, taking advantage of the tie-rod-free profile to minimize spatial interference along the assembly line.
Selecting this 100 mm bore makes sense when your application requires substantial thrust, generating 3927 N of push at 0.5 MPa. If you need to scale down, the 80 mm bore provides 2513 N of push, whereas stepping up to the 125 mm bore yields 6136 N. Because this is a 350 mm stroke, the unsupported piston rod (Ø25 mm) is susceptible to bending under lateral loads; always pair it with an external guide rail to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other standard profile cylinders. To match this exact configuration, specify a 100 mm bore, 350 mm stroke, PT1/2 port thread, CA clevis mounting, and no magnet. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load vertically if air pressure drops.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force reaches 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range for this 100 mm bore cylinder is 30-800 mm/s.
No. The field-adjustable air cushion at both ends is designed strictly to decelerate the piston near the stroke limits, not to act as a locking mechanism. If your application requires position holding during air loss or valve centering, you must integrate an external pilot-operated check valve or use an AirTAC BSE rod-lock cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.