The AirTAC AirTAC SE100X350S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X350S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa, utilizing a 25 mm hard-chrome piston rod and an M20x1.5 thread. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining standardized ISO 15552 dimensions.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune end-stop deceleration via a setscrew, softening impacts when moving heavy loads at speeds up to 800 mm/s.
| Model | AirTAC SE100X350S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging its 3927 N push force, this cylinder reliably shoves heavy corrugated cardboard cases onto pallet wrappers without hesitation.
Provides steady 0.5 MPa clamping pressure to hold large sheet metal blanks securely in place during heavy press brake forming operations.
The 350 mm stroke and DMSE sensor compatibility ensure precise ejection of molded automotive interior panels from deep cavity molds.
Generating 3927 N of push at 0.5 MPa, this 100 mm bore is optimal for heavy lifting. If your assembly requires less force, the 80 mm bore provides 2513 N, whereas stepping up to the 125 mm bore yields 6136 N. Remember that a plain SE cylinder will drift if air pressure is lost; for fail-safe load holding, consider the BSE rod-lock variant. The PT1/2 port and standard mounting interface make it a drop-in retrofit for any ISO 15552 footprint.
At 350 mm of stroke, the unsupported 25 mm rod exerts significant leverage on the guide bearing under lateral loads. To prevent premature seal wear and bearing bending, integrate an external guide rail to support the load rather than relying solely on the piston rod.
Quick checklist
The SE100X350S generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. It features a PT1/2 port, a 25 mm rod, and an M20x1.5 rod-end thread.
Yes, the SE100X350S is dimensionally interchangeable per ISO 15552 standards. You can use existing mounting hardware and drop it into the same footprint as other ISO 15552 profile cylinders without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.