The AirTAC AirTAC SE100X35S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 35mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X35S is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-thrust tasks, delivering 3927 N of push force at 0.5 MPa. Driven by filtered air, it operates seamlessly within a 0.15-1.0 MPa pressure range and reaches speeds of 30-800 mm/s. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while surviving 1.5 MPa proof pressures.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows mechanics to tune end-of-stroke deceleration via a set screw, softening hard impacts during rapid 35 mm strokes. Its PT1/2 port and M20x1.5 rod thread ensure robust airflow and structural integrity for heavy-duty cycles.
| Model | AirTAC SE100X35S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of thrust at 0.5 MPa to secure heavy injection mold halves during the 35 mm closing sequence, ensuring precise parting lines.
Delivers rapid 30-800 mm/s actuation for light-duty stamping dies, using its adjustable cushion to decelerate the 25 mm rod smoothly at the stroke end.
Exerts up to 801 kgf at 1.0 MPa to drive short-stroke metal bending tools, with the -S magnet triggering DMSE sensors for accurate press positioning.
Generating 3927 N of push at 0.5 MPa, this 100 mm bore is ideal when an 80 mm bore (2513 N push) falls short but a 125 mm bore (6136 N push) is oversized. For applications needing to hold a load safely without live air pressure, remember this standard SE cylinder will drift if air is lost—consider the BSE rod-lock variant instead. Because it is dimensionally interchangeable per ISO 15552, it serves as a direct drop-in replacement for other ISO 15552 cylinders, utilizing identical mounting hardware and a PT1/2 port.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force reaches 5497 N. The maximum push force is 801 kgf at 1.0 MPa.
Yes, the SE100X35S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and PT1/2 port interface as other standard ISO 15552 profile cylinders, allowing a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.