The AirTAC AirTAC SE100X360S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 360mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X360S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. It utilizes a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated -S magnet enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s. With a 100 mm bore, this cylinder provides substantial thrust for demanding industrial cycles, and its standardized ISO 15552 mounting interface ensures seamless physical interchangeability with comparable profile cylinders.
| Model | AirTAC SE100X360S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa required to hold heavy steel panels firmly in place during robotic spot-welding operations.
Utilizes its 360 mm stroke to push fully loaded pallets off a main high-speed conveyor line onto a secondary packaging spur without stalling.
Deploys the adjustable end cushions to smoothly fold thick cardboard flaps on large appliance cartons, preventing tearing during the sealing process.
Selecting the SE100X360S provides 3927 N of push at 0.5 MPa, striking a balance for heavy material handling. If your application requires less force, the 80 mm neighbor bore offers 2513 N push at 0.5 MPa; stepping up to the 125 mm bore yields 6136 N push at 0.5 MPa for higher load demands. Remember that a plain SE cylinder relies on live air pressure to maintain its position—if air is lost or the valve centers, the piston will drift, so integrate a BSE rod lock for safety-critical holding.
At a 360 mm stroke, the 25 mm piston rod experiences increased bending moments under side loads. To prevent premature rod-bearing wear, pair this cylinder with an external guide rail to support the load independently. This model includes a PT1/2 port, a built-in magnet for CMSE/DMSE sensors, and standard ISO 15552 mounting accessories for direct retrofitting.
Quick checklist
The SE100X360S delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE100X360S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using standard mounting accessories, matching the 100 mm bore, 360 mm stroke, and PT1/2 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.