The AirTAC AirTAC SE100X375 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 375mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X375 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Utilizing a 100 mm bore and a 375 mm stroke, it generates a substantial 3927 N push at 0.5 MPa and up to 801 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant housing that mounts flush against machine frames while retaining full dimensional interchangeability with other ISO 15552 cylinders.
This specific SKU is configured without a piston magnet, meaning it is ready for purely mechanical drive tasks without position sensing. To manage the kinetic energy of its 25 mm hard-chrome rod at speed, the cylinder integrates field-adjustable pneumatic cushioning at both ends. Technicians can tune these cushion screws to soften end-of-stroke impacts, ensuring smooth deceleration rather than relying on a fixed rubber bumper.
| Model | AirTAC SE100X375 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push at 0.7 MPa required to slide heavy injection molding platens into locking position, utilizing the 375 mm stroke to clear the mold area for tool changes.
Drives large mechanical arms to fold cardboard flaps on oversized pallet loads, where the 801 kgf maximum thrust ensures crisp folds even on thick corrugated materials.
Pushes heavy steel billets into a hydraulic press bed, leveraging the tie-rod-free extruded profile to sit flush against the press frame and save floor space.
Selecting the SE100X375 is appropriate when your application requires high thrust over a moderate distance. If you need slightly less force, stepping down to the 80 mm bore drops the 0.5 MPa push to 2513 N, whereas stepping up to the 125 mm bore increases it to 6136 N. Because this SKU lacks the S option for a magnet, it cannot host CMSE or DMSE sensors; if your sequence requires electronic or reed position feedback, specify an SE100X375S instead. Furthermore, this plain double-acting cylinder will drift if air pressure is lost or the valve centers, so it cannot hold a vertical load safely without an external rod lock like the BSE series.
With a 375 mm stroke, the unsupported length of the 25 mm rod increases susceptibility to side-load bending. For optimal rod-bearing life, mount an external guide to absorb any lateral forces and prevent premature seal wear. The cylinder uses a PT1/2 port and an M20x1.5 rod thread, matching standard ISO 15552 mounting accessories.
Quick checklist
The SE100X375 delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum rated push force is 801 kgf at 1.0 MPa.
Yes, the SE100X375 is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 100 mm bore, 375 mm stroke, PT1/2 port, and standard mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.