The AirTAC AirTAC SE100X380S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 380mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X380S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a substantial 3927 N push force at 0.5 MPa and utilizes a 380 mm stroke to move substantial loads. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when cycling heavy masses at high speeds.
| Model | AirTAC SE100X380S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to actuate heavy lower clamps and tool holders on industrial sheet metal press brakes.
Uses the 380 mm stroke to push loaded pallets cleanly across transfer lines without requiring external pneumatic boosters.
Deploys the 25 mm rod to fold and square large corrugated cartons, relying on the adjustable cushion to prevent tearing at high speed.
Selecting the SE100X380S makes sense when your application requires pushing forces near 3927 N at 0.5 MPa. If you need less force and want a smaller footprint, stepping down to the 80 mm bore provides 2513 N of push. Conversely, if your load demands more power, the 125 mm bore yields 6136 N. Because this model features a 380 mm stroke, the 25 mm rod and internal bearing face increased bending moments under side loads; always pair it with an external guide rail to prevent premature seal wear.
As a true ISO 15552 profile cylinder, this 100 mm bore unit with a PT1/2 port and 380 mm stroke is dimensionally interchangeable with other ISO 15552 cylinders, making it a drop-in retrofit for existing setups using standard FA or LB mounting accessories. Note that while the adjustable cushion decelerates the piston near stroke end, it does not lock the rod; if the air supply drops, the load will drift. For position holding without live pressure, consider the BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum rated push force is 801 kgf at 1.0 MPa.
Yes. The SE100X380S is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting dimensions and PT1/2 port are fully interchangeable with other ISO 15552 profile cylinders. You can drop it directly into existing FA or FB mounting brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.