The AirTAC AirTAC SE100X380SFTC ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 380mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X380SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Delivering a robust 3927 N push force at 0.5 MPa and an 801 kgf maximum output at 1.0 MPa, it drives demanding loads with precision. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting mechanical snags.
This 100mm bore unit integrates a built-in magnet for CMSE reed and DMSE electronic position sensing, ensuring accurate end-of-stroke verification. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s operations. Equipped with a PT1/2 port and an FTC center trunnion mounting interface, it provides standardized ISO 15552 dimensions for seamless retrofitting.
| Model | AirTAC SE100X380SFTC ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push force at 0.5 MPa to eject heavy stamped metal panels from a press bed, relying on the 380mm stroke to clear the die area completely during tool changes.
Leverages the FTC trunnion mount to pivot a heavy transfer arm across a packaging line, utilizing the adjustable end cushions to soften the deceleration of full product loads at high cycling speeds.
Deploys the 380mm stroke to reach across wide industrial cartons, using the integrated S magnet and DMSE electronic sensors to confirm flap positioning before the sealing head applies adhesive.
Selecting this 100mm bore cylinder makes sense when your application requires the 3927 N push force at 0.5 MPa. If your load is lighter, stepping down to the 80mm bore offers 2513 N of push force, saving valuable space and air consumption. Conversely, if you need to move heavier payloads, stepping up to the 125mm bore provides 6136 N of thrust. Because the 380mm stroke generates significant leverage, the Ø25mm rod and its bearing are subject to bending moments under side loads; always support the payload with an external linear guide to prevent premature wear.
This model includes an FTC trunnion mount and a built-in S magnet for CMSE / DMSE sensors. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock the rod. If your machinery must hold a vertical load without live air pressure, pair this cylinder with an external rod lock or a pilot-operated check valve.
Quick checklist
This 100mm bore cylinder operates at speeds of 30-800 mm/s. At 0.5 MPa it provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa the push force increases to 5497 N, and it reaches a maximum push force of 801 kgf at 1.0 MPa.
Yes, the SE100X380SFTC is dimensionally interchangeable per ISO 15552 standards, featuring a PT1/2 port and an FTC mounting interface. You can drop it into existing ISO 15552 footprints and utilize standard mounting hardware without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.