The AirTAC AirTAC SE100X382S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 382mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X382S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty motion control. It delivers a robust 3927 N push force at 0.5 MPa and features a made-to-order 382 mm stroke to suit specialized machinery layouts. The extruded aluminum barrel lacks external tie rods, yielding a flush, corrosion-resistant exterior that simplifies mounting flush against machine frames.
This specific configuration includes a built-in magnet (-S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. To absorb kinetic energy at high speeds, field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration precisely, preventing hard impact on the 25 mm piston rod.
| Model | AirTAC SE100X382S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 382 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×382 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy mold platens in injection molding machines, utilizing the 3927 N push force to securely lock molds under high pressure.
Acts as a robust stop gate in heavy-duty pallet transfer lines, using the extended 382 mm stroke to clear large conveyor passages.
Feeds raw billets into hydraulic forging presses, relying on the adjustable end cushions to soften deceleration of heavy metal masses.
Selecting this 100 mm bore provides 3927 N of push at 0.5 MPa, striking a balance for high-load tasks. If your application requires less force, stepping down to the 80 mm bore yields 2513 N push, whereas upgrading to the 125 mm bore provides 6136 N push for heavier payloads. Remember that a standard SE cylinder cannot hold a load if air pressure drops; for fail-safe position holding, consider the BSE rod-lock variant.
Because this unit features a non-standard 382 mm stroke, the unsupported length of the 25 mm rod at full extension invites side-load bending. For strokes of 300 mm or more, always incorporate an external guide rail to prevent rod-bearing distortion and premature seal wear.
Quick checklist
The SE100X382S features a 100 mm bore with a PT1/2 port. It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, allowing it to drop into existing ISO 15552 mounting hardware without footprint changes. The built-in -S magnet works specifically with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.