The AirTAC AirTAC SE100X40 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 40mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X40 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa and features a 40 mm stroke. Built with an extruded aluminum barrel, this unit omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This model incorporates field-adjustable air cushioning at both ends to precisely tune end-of-stroke deceleration, protecting payloads from hard impacts. It uses a PT1/2 port and a Ø25 mm piston rod with an M20x1.5 thread. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | AirTAC SE100X40 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of push at 0.5 MPa to secure mid-sized injection mold halves, leveraging the 40 mm stroke for rapid, high-force clamping cycles.
Actuates heavy-duty press brake tooling where the 100 mm bore and M20x1.5 rod thread handle significant side loads during metal bending operations.
Functions as a high-force stopper gate on heavy-duty pallet conveyors, using the adjustable end cushions to soften the impact of incoming 80 kg loads.
If 3927 N of push at 0.5 MPa is excessive for your setup, stepping down to the 80 mm bore yields 2513 N, while moving up to the 125 mm bore provides 6136 N for heavier loads. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for comparable ISO 15552 cylinders, simplifying retrofits.
Because this SKU lacks the -S magnet, position sensing is unavailable out of the box. Furthermore, the air cushion only decelerates the piston near stroke end; it does not hold a load. If your process loses air pressure, the rod will drift. For positive holding, consider a BSE rod lock variant.
Quick checklist
The SE100X40 generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE100X40 is dimensionally interchangeable with other ISO 15552 profile cylinders, matching standard mounting and port dimensions. However, this specific SKU lacks a built-in magnet, so it cannot support AirTAC CMSE or DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.