The AirTAC AirTAC SE100X400 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 400mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X400 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. Featuring a 100 mm bore and 400 mm stroke, it generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames without snagging.
This CB double-clevis mounted unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw to soften hard impacts at high cycling speeds. Operating at 30-800 mm/s, this specific SKU lacks a built-in position magnet, meaning no CMSE or DMSE electronic sensors can be fitted without modifying the piston assembly.
| Model | AirTAC SE100X400 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 400 mm stroke strapping head on an end-of-line palletizer, using its 3927 N push force to tension and seal heavy-gauge steel banding around bulk freight loads.
Actuates a 100 mm bore guiding arm on a CNC press brake, ensuring heavy upper tooling descends with precise parallelism during thick metal plate bending operations.
Deploys a 400 mm ejector grid on a large-tonnage injection molding machine, using 3681 N of retract pull force to safely extract heavy automotive interior panels from the mold cavity.
Generating 3927 N of thrust at 0.5 MPa, this 100 mm bore sits perfectly for high-mass actuation. If your load requires less force, stepping down to the 80 mm bore yields 2513 N push at 0.5 MPa, whereas scaling up to the 125 mm bore provides 6136 N. Because the 400 mm stroke introduces leverage on the M20x1.5 rod thread, long unsupported movements induce bending moments on the rod bearing; an external guide rail is strongly recommended to prevent premature seal wear.
As a true ISO 15552 cylinder, it offers a drop-in dimensional replacement for other profile cylinders, matching the standardized 100 mm bore footprint, PT1/2 port, and CB mounting interface. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your application loses air pressure, the rod will drift, requiring a BSE rod lock or external pilot-operated check valve for true position holding.
Quick checklist
The SE100X400 generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum allowable operating pressure is 1.0 MPa, where the cylinder achieves a maximum push force of 801 kgf.
Yes, the SE100X400 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounting hardware matching the 100 mm bore footprint, CB double clevis accessory, and PT1/2 port locations without machining the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.