The AirTAC AirTAC SE100X40S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 40mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X40S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its extruded aluminum barrel lacks external tie rods, yielding a sleek, corrosion-resistant body that mounts flush against machinery frames while maintaining the standardized ISO 15552 footprint for seamless retrofitting.
Equipped with a built-in magnet (-S), this unit supports direct mounting of CMSE reed and DMSE electronic sensors along the triple-sided sensor grooves. The field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to absorb kinetic energy at the 40 mm stroke limits, ensuring quiet, impact-free operation.
| Model | AirTAC SE100X40S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to secure injection mold halves during low-pressure closing sequences before the main hydraulic press engages.
Ejects stamped metal body panels from press dies using its 40 mm stroke, relying on adjustable end cushions to prevent panel denting during rapid retraction.
Positions the back-gauge stop on a heavy plate bending machine, utilizing the 25 mm hard-chrome rod and M20x1.5 thread to maintain rigidity under high side-loading.
Selecting this 100 mm bore model makes sense when your application demands high thrust, specifically the 3927 N push at 0.5 MPa. If you need slightly less force, stepping down to the 80 mm bore yields 2513 N push, whereas scaling up to the 125 mm bore provides 6136 N push for extreme load moving. Because the SE100X40S is a standard double-acting cylinder, it cannot hold a load statically if air pressure drops or the valve centers; for fail-safe position holding, consider the BSE rod lock variant. For ISO 15552 dimensional interchangeability, match the 100 mm bore, 40 mm stroke, PT1/2 port, basic mounting, and the -S magnet requirement.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force increases to 5497 N. The maximum allowable push force is 801 kgf at 1.0 MPa operating pressure.
Yes, the SE100X40S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders by matching the 100 mm bore, 40 mm stroke, PT1/2 port, and basic mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.