The AirTAC AirTAC SE100X425SH ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X425SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and a 425 mm stroke to move substantial loads. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint.
Equipped with a high-temperature FKM seal, this unit operates reliably from -20 to +150 C, making it ideal for demanding thermal environments. The built-in magnet enables seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, protecting machinery from hard impacts during high-speed cycling.
| Model | AirTAC SE100X425SH ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the high 3927 N push force required to slide heavy injection molding platens into clamping position, while the FKM seal withstands ambient radiant heat up to 150 C.
Actuates heavy structural diverting arms over a 425 mm stroke to re-route loaded pallets on a packaging line, relying on adjustable cushioning to soften the rapid end stops.
Ejects dense stamped metal parts from a hydraulic press bed, utilizing the 25 mm rod and M20x1.5 thread to absorb the repetitive shock of part ejection.
Selecting the SE100X425SH is optimal when your application requires moving heavy payloads with high thrust. If you need to step the bore down, the 80 mm variant provides 2513 N push at 0.5 MPa; stepping up to the 125 mm bore yields 6136 N push at 0.5 MPa. This 100 mm model strikes a balance, offering 5497 N push at 0.7 MPa. Because the 425 mm stroke exceeds 300 mm, the unsupported piston rod is susceptible to bending under side loads—always pair this cylinder with an external guide rail to prevent premature rod-bearing wear.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 cylinders without altering mounting hardware. It features a PT1/2 port, a 25 mm rod with an M20x1.5 thread, and the -S magnet for sensing. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If the system must hold a vertical load without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders. The included -S magnet works directly with AirTAC CMSE reed switches and DMSE electronic sensors, which slot into the standard sensor grooves on the barrel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.