The AirTAC AirTAC SE100X45 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 45mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X45 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. Operating at 0.5 MPa, it delivers a substantial 3927 N push force and 3681 N pull force, scaling to 5497 N push at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and maximizes space efficiency on large machinery.
This 100 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread, paired with a PT1/2 port for high-flow air delivery. Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration, softening hard impacts when moving heavy masses. Note that this specific SKU lacks a position-sensing magnet, so it operates without CMSE or DMSE switches.
| Model | AirTAC SE100X45 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to actuate clamping arms and hold heavy press brake tooling securely in place during sheet metal forming.
Utilizes the short 45 mm stroke and 5497 N push at 0.7 MPa to break the initial suction and separate large injection mold halves efficiently.
Delivers rapid 30-800 mm/s ejection of finished parts from large mechanical stamping presses, leveraging the adjustable cushion to halt the 801 kgf load smoothly.
With a 45 mm stroke, this model is purpose-built for short, high-force movements. If your application requires less thrust, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa, whereas scaling up to the 125 mm bore provides a 6136 N push for heavier loads. Because the stroke is under 300 mm, rod-bearing bending stress is minimal, though external guides are still recommended for offset loads.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other standard profile cylinders, sharing identical mounting footprints and hardware. Remember that a standard SE cylinder does not hold its load when air pressure is lost or exhausted; if your application requires static position holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, the SE100X45 generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE100X45 is dimensionally interchangeable per ISO 15552 standards. Its square extruded profile barrel allows it to serve as a drop-in replacement for other ISO 15552 cylinders, utilizing the same mounting accessories and footprint without requiring machinery redesigns.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.