The AirTAC AirTAC SE100X450S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X450S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push force at 0.5 MPa, making it well-suited for demanding industrial automation. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 100mm bore, 450mm stroke unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, absorbing kinetic energy to prevent hard impacts during high-speed cycles.
| Model | AirTAC SE100X450S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force required to fold and seal heavy corrugated cardboard cases on automated palletizing lines, utilizing the 450mm stroke to clear the packaging mechanism.
Drives the knockout plate for large plastic molded parts, using the adjustable end cushions to softly decelerate the 25mm rod and protect expensive mold tooling over long cycles.
Actuates the heavy clamp and feed mechanism on a power press, where the magnetic piston paired with DMSE sensors ensures precise timing for sheet metal advancement.
Generating 3927 N of push force at 0.5 MPa, this model is ideal for heavy manipulation. If your application requires less force, the 80mm bore variant offers 2513 N push, while stepping up to the 125mm bore provides 6136 N for extreme load moving. Because the 450mm stroke exceeds 300mm, the 25mm rod and bearing are subject to bending moments under side loads; an external guide is strongly recommended to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other standard profile cylinders. To complete your setup, specify the PT1/2 port, choose your mounting accessory (FA, LB, or TC), and pair the -S magnet with CMSE or DMSE switches. Note that standard air cushions only decelerate the piston near stroke end; they do not hold a load if air pressure is lost.
Quick checklist
The SE100X450S generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum operating pressure is 1.0 MPa, where it achieves a maximum push force of 801 kgf.
No, the SE100X450S is a double-acting cylinder and the adjustable air cushions only decelerate the piston near the stroke ends; they do not lock or hold a load. If you need to maintain a vertical position without constant air pressure, you must use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.