The AirTAC AirTAC SE100X460SCBCR ISO 15552 Cylinder | 100mm is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 460mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X460SCBCR is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty motion. It delivers a substantial 3927 N push force at 0.5 MPa and utilizes a PT1/2 port paired with a 25 mm hard-chrome rod. Because the extruded aluminum barrel lacks external tie rods, the body is inherently more compact and corrosion-resistant, allowing you to mount accessories flush against machine frames without physical interference.
This specific configuration includes a built-in -S magnet for non-contact position sensing via CMSE reed or DMSE electronic switches. The integrated CB double clevis mounting accessory is ideal for pivoting mechanisms, while the field-adjustable air cushioning at both ends lets you fine-tune end-of-stroke deceleration to absorb heavy kinetic energy smoothly rather than relying on a fixed bumper.
| Model | AirTAC SE100X460SCBCR ISO 15552 Cylinder | 100mm |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 460 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×460 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a heavy swing-arm mechanism on a palletizing machine, using the CB clevis to pivot while providing the 3927 N push force required to lift loaded pallet layers.
Pushes heavy injection-molded automotive interior panels out of a press, relying on the 36 mm adjustable cushion to softly stop the 100 mm bore before it impacts the mold face.
Actuates a thick steel leveling and straightening press, where the 460 mm stroke accommodates deep material feeds and the -S magnet confirms full extension via DMSE sensors.
Generating 3927 N of push at 0.5 MPa, this 100 mm bore is a workhorse for high-load automation. If your payload is lighter, the 80 mm bore offers 2513 N of push, conserving space and air consumption. For even heavier lifting, the 125 mm bore provides 6136 N of thrust. Keep in mind that a standard SE cylinder relies on live air pressure to hold its load; if pneumatic supply is lost, the piston will drift, so a BSE rod lock is required for secure fail-safe holding.
At 460 mm of stroke, the 25 mm rod and its M20x1.5 thread face significant bending moments under side loads. For this long stroke, adding an external guide rail is strongly recommended to prevent premature rod-bearing wear. Dimensionally interchangeable per ISO 15552, this cylinder serves as a direct drop-in replacement for other ISO 15552 cylinders, matching standard mounting footprints exactly.
Quick checklist
This 100 mm bore cylinder provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. It features a PT1/2 port, a 25 mm rod, and an M20x1.5 rod-end thread.
Yes, the built-in -S magnet is fully compatible with AirTAC CMSE reed and DMSE electronic sensors for position detection. However, it cannot hold a load without air pressure; the adjustable cushion only decelerates the piston near stroke end, so a BSE rod lock is needed for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.