The AirTAC AirTAC SE100X470S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 470mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X470S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 100 mm bore and a 470 mm stroke, generating a substantial 3927 N push force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up the perimeter for accessory brackets.
This specific unit includes the -S magnet code for non-contact position detection using AirTAC CMSE reed or DMSE electronic switches seated in the three integrated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at high speeds.
| Model | AirTAC SE100X470S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ejects heavy formed sheet metal parts from stamping presses, utilizing the 3927 N push force at 0.5 MPa to overcome die friction and reliably clear the tooling cavity.
Drives the core pull or stripper plate assembly on large plastic injection molding machines, where the 470 mm stroke accommodates deep mold cavities and long core travel.
Actuates heavy-duty diverter arms on automated packaging conveyors, using the 3681 N retract pull force to swiftly reposition fully loaded pallets onto spur lines.
When sizing this 100 mm bore actuator, evaluate your force requirements against its neighbors: the 80 mm bore yields 2513 N of push at 0.5 MPa, while the 125 mm bore provides 6136 N. If your dynamic load requires less than 2500 N of thrust, stepping down to the 80 mm saves physical envelope and air consumption; if you need to overcome higher friction or move heavier masses, the 125 mm is the logical upgrade. Because this model features a 470 mm stroke, the extended rod is subject to bending forces under lateral loads—an external guide rail should be used to prevent rod-bearing wear and side-load damage.
For drop-in retrofits, the SE100X470S is dimensionally interchangeable per ISO 15552 mounting interfaces. Confirm your replacement matches the 100 mm bore, 470 mm stroke, PT1/2 port, and desired mounting accessory (such as FA or TC). Note that a standard double-acting cylinder drifts when air pressure is removed or a valve is centered; it cannot hold a vertical load safely without a pilot-operated check valve or a dedicated BSE rod lock variant.
Quick checklist
The 100 mm bore provides a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push rating of 801 kgf at 1.0 MPa. The air supply connects via a PT1/2 port.
No, the double-acting SE100X470S cannot hold a load without live air pressure; the piston will drift if the valve is centered or air is lost. The adjustable air cushion at both ends only decelerates the piston near the stroke ends and does not function as a mechanical brake. For secure load holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.