The AirTAC AirTAC SE100X475 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 475mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X475 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This design simplifies retrofitting into existing ISO 15552 footprints without custom brackets.
This 100 mm bore unit features a 475 mm stroke and relies on a field-adjustable pneumatic cushion at both ends to decelerate heavy loads smoothly. Because this specific SKU lacks the internal magnet suffix, it does not support direct position sensing without modification. The cushioning screws can be tuned on-site to soften end-of-stroke impacts for moving masses.
| Model | AirTAC SE100X475 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa required to hold heavy steel body panels firmly in place during robotic spot-welding operations.
Utilizes its 475 mm stroke to push loaded pallets off a main high-speed conveyor line onto a secondary packaging spur without stalling.
Leverages the adjustable end cushions to gently press and seal large industrial shipping crates over the 475 mm travel distance without shock-loading the lid.
Selecting the SE100X475 makes sense when your application requires substantial thrust within a 475 mm travel. If you need slightly less force, stepping down to the 80 mm bore drops the 0.5 MPa push output to 2513 N. Conversely, scaling up to the 125 mm bore increases the 0.5 MPa push to 6136 N for heavier payloads. At 475 mm of travel, the 25 mm piston rod experiences increased bending moments under side loading; utilizing an external guide rail prevents premature rod-bearing wear.
As a standard double-acting cylinder, this model will drift if air pressure is lost or the valve centers, meaning it cannot hold a vertical load safely without a pilot-operated check valve or a dedicated BSE rod lock variant. It uses a PT1/2 port and standard ISO 15552 mounting accessories.
Quick checklist
The SE100X475 generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing you to reuse existing mounting hardware. This specific SKU does not include a built-in magnet, so it cannot host CMSE or DMSE position sensors without modifying the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.