The AirTAC AirTAC SE100X480S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 480mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X480S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push at 0.5 MPa and utilizes a PT1/2 port with a Ø25 mm rod. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 mounting interface.
Because this specific unit includes the -S magnet code, it is fully primed for drop-in CMSE reed or DMSE electronic position sensing along its three integrated sensor grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at high velocities.
| Model | AirTAC SE100X480S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 480 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×480 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a heavy mold clamping carriage with 3927 N push at 0.5 MPa, utilizing the 480 mm stroke to fully clear the tooling for robotic extraction.
Shifts loaded pallets along an assembly line, relying on the -S magnet and DMSE sensors to confirm full 480 mm extension for precise positioning.
Actuates a heavy-duty lifting fork in an AS/RS crane, where the adjustable air cushions absorb the massive end-of-stroke kinetic energy of the descending load.
At 0.5 MPa, this 100 mm bore generates 3927 N of push force. If your application requires less force, stepping down to the 80 mm bore yields 2513 N, whereas moving up to the 125 mm bore provides 6136 N. The 480 mm stroke is a standard length, but at this extended reach, the unsupported piston rod is highly susceptible to bending under side loads; integrating an external guide rail is strongly recommended to prevent premature rod-bearing wear.
As a standard double-acting cylinder, the SE100X480S relies on live air pressure to hold a load and will drift if air is lost or the valve centers. If your machine requires true position holding without continuous air, consider the AirTAC BSE series with an integrated rod lock. For a drop-in retrofit, this model matches the ISO 15552 footprint exactly, requiring only your existing mounting hardware and PT1/2 pneumatic fittings.
Quick checklist
This 100 mm bore cylinder delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE100X480S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and PT1/2 port locations for a drop-in retrofit. The -S magnet also allows you to directly mount AirTAC CMSE or DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.