The AirTAC AirTAC SE100X5 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 5mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X5 is a double-acting single-rod ISO 15552 profile cylinder engineered for ultra-short 5 mm strokes. It delivers a substantial 3927 N push force at 0.5 MPa (801 kgf maximum at 1.0 MPa), making it ideal for high-impact pressing and short-travel clamping. The extruded aluminum barrel features a square profile without external tie rods, keeping the body compact and corrosion-resistant for flush mounting in tight machine cells.
Unlike fixed rubber bumpers, this cylinder provides field-adjustable air cushioning at both ends to decelerate the piston near the stroke limits. Because this SKU lacks the -S magnet code, it does not support AirTAC CMSE or DMSE position sensors out of the box. The 36 mm cushion length and M20x1.5 rod thread ensure robust energy absorption and high side-load resistance for heavy-duty automation.
| Model | AirTAC SE100X5 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push at 0.5 MPa to eject thick steel blanks from a hydraulic stamping press, relying on the 5 mm stroke for rapid, short-travel extraction.
Provides high clamping force for robotic spot welding guns, utilizing the 100 mm bore and 801 kgf max force to hold heavy steel assemblies in place during the weld cycle.
Strips sheet metal parts from punch press dies using a compact 5 mm stroke, where the tie-rod-free profile allows flush mounting inside the tight press bolster.
Selecting this 100 mm bore model provides 3927 N push at 0.5 MPa. If you need slightly less force, stepping down to the 80 mm bore yields 2513 N push. If your application requires even heavier thrust, the 125 mm bore offers 6136 N push at 0.5 MPa. Remember that a plain SE cylinder does not hold a load if air pressure is lost or the valve is centered; for position holding, consider the BSE rod lock variant.
This 5 mm stroke is a non-standard, made-to-order dimension. Because the stroke is under 300 mm, standard rod-bearing bending is minimal, but the massive force over such a short travel demands rigid external guiding to prevent rod deflection. It is dimensionally interchangeable per ISO 15552, allowing a drop-in replacement for other ISO 15552 cylinders using the standard PT1/2 port and basic mounting hardware.
Quick checklist
The 100 mm bore provides a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa operating pressure.
This specific SKU does not include a built-in magnet (-S code), so it cannot support AirTAC CMSE reed or DMSE electronic sensors. You would need the SE100X5S variant for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.