The AirTAC AirTAC SE100X500 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 3927 N push force at 0.5 MPa. Designed with a 100 mm bore and a 500 mm stroke, it integrates an LB foot mounting bracket and a built-in S magnet for position sensing. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components from workshop debris.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors along the three-sided sensor groove, ensuring precise end-position detection in automated assembly lines.
| Model | AirTAC SE100X500 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles heavy billet loading into forming presses where the 3927 N push force at 0.5 MPa easily overcomes die friction and positions heavy steel plates.
Swings heavy pallets across high-throughput packaging conveyors, relying on the 500 mm stroke and LB foot mount to absorb lateral shifting forces during transit.
Drives large mold ejection plates in plastic injection machinery, using the adjustable end cushions to safely decelerate heavy tooling masses moving at high speeds.
Generating 3927 N of thrust at 0.5 MPa, this 100 mm bore cylinder is well-suited for heavy pressing and lifting tasks. If your application requires less force, stepping down to the 80 mm bore model yields 2513 N at 0.5 MPa, whereas scaling up to the 125 mm variant provides a massive 6136 N push. Remember that a standard SE cylinder relies on live air pressure to hold its load; if pneumatic supply drops, the piston will drift and cannot maintain vertical position without an external pilot-operated check valve or a BSE rod lock variant.
Because this unit features a 500 mm stroke, the unsupported rod length increases susceptibility to bending moments under severe side loads. For optimal bearing life, pair this cylinder with an external guide rail to support the load and prevent rod-bearing damage. As a true ISO 15552 profile cylinder, it offers a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing a PT1/2 port, an LB foot mount, and an S magnet for CMSE/DMSE switches.
Quick checklist
At a 0.5 MPa operating pressure, this 100 mm bore cylinder generates 3927 N of push force and 3681 N of pull force. When pressure increases to 0.7 MPa, the push force reaches 5497 N. The absolute maximum push capacity is 801 kgf when operating at the maximum rated pressure of 1.0 MPa.
Yes, the SE100X500SLB is manufactured to the ISO 15552 / VDMA 24562 standard, making it dimensionally interchangeable with other ISO 15552 profile cylinders. It utilizes a PT1/2 port, an LB foot mounting interface, and includes an S magnet compatible with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.