The AirTAC AirTAC SE100X500H ISO 15552 Cylinder | FKM High Temp is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature actuation. It generates a substantial 3927 N of push force at 0.5 MPa (5497 N at 0.7 MPa) across a 500 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies direct mounting and reduces debris buildup in hot industrial environments.
Equipped with a Viton (FKM) elastomer seal, this unit reliably operates in ambient temperatures up to 150 C where standard TPU seals would fail. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration for heavy 100 mm payloads. Note that this specific SKU lacks a built-in magnet, so position sensing requires external switches or a different variant.
| Model | AirTAC SE100X500H ISO 15552 Cylinder | FKM High Temp |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the platen in adhesive laminating equipment, utilizing the FKM seal to withstand 150 C ambient heat while delivering 3927 N of clamping force at 0.5 MPa.
Secures heavy automotive castings during CNC milling, where the 500 mm stroke positions fixtures and the no-tie-rod profile prevents metal chip accumulation.
Indexes plastic sheet molds in and out of high-temperature ovens, relying on the adjustable cushioning to decelerate the 801 kgf max load smoothly.
When sizing this 100 mm bore, verify if stepping down to a 63 mm bore (1559 N push at 0.5 MPa) or up to a 125 mm bore (6136 N push at 0.5 MPa) better matches your dynamic load. As a true ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, matching the 100 mm footprint, 500 mm stroke, PT1/2 port, and standard mounting accessories. Because this unit lacks the -S magnet, it cannot host AirTAC CMSE or DMSE position sensors.
The 500 mm stroke on a Ø25 mm rod demands careful attention to side-load mechanics. Over long unsupported extensions, bending moments place significant stress on the rod bearing. For heavy lateral loads, integrate an external guide rail to prevent premature wear and cylinder binding.
Quick checklist
This 100 mm bore cylinder provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Because it uses a Viton (FKM) seal, its operating temperature extends from -20 C to 150 C.
No, the SE100X500H is a double-acting cylinder and cannot hold a load without live air pressure. The adjustable air cushioning only decelerates the piston near the stroke ends; it does not act as a brake. For position holding, consider a BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.