The AirTAC AirTAC SE100X500S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 3927 N push force at 0.5 MPa and a maximum of 801 kgf at 1.0 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides for flexible positioning.
Because this variant includes the -S magnet code, it is fully wired for AirTAC CMSE reed and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both ends lets technicians dial in end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 500 mm strokes.
| Model | AirTAC SE100X500S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives large corrugated cartons onto wooden pallets at 3927 N push force, using the 500 mm stroke to clear multi-layer stacking zones.
Positions heavy sheet metal backstops in a hydraulic press brake, relying on the extruded profile body for flush mounting and repeatable 100 mm bore power.
Actuates a secondary mold ejection arm in an injection molding machine, where the DMSE electronic sensor tracks the full 500 mm retract position.
If your assembly needs less force, the 80 mm bore provides 2513 N of push at 0.5 MPa, whereas stepping up to the 125 mm bore yields 6136 N. This 100 mm model hits a sweet spot for heavy actuation, and its ISO 15552 mounting interface makes it a drop-in dimensional replacement for other standard profile cylinders without requiring custom brackets.
At 500 mm of stroke, the Ø25 mm rod and M20x1.5 thread carry significant side-load potential; always specify an external guide to prevent rod-bearing bending under unsupported loads. Note that a plain SE cylinder drifts when air is lost—use a BSE rod lock if the mechanism must hold a load without live pressure. The PT1/2 port and -S magnet ensure straightforward integration.
Quick checklist
The SE100X500S generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE100X500S shares the standardized ISO 15552 / VDMA 24562 mounting interface and dimensions, making it a drop-in replacement for equivalent profile cylinders. The -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.