The AirTAC AirTAC SE100X500S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and a 500 mm stroke to power demanding industrial equipment.
This model features a square extruded aluminum barrel without external tie rods, which keeps the body compact and flush-mountable while resisting corrosion. The integrated -S magnet enables direct fitment of CMSE reed or DMSE electronic sensors along the triple-sided grooves, and the field-adjustable air cushioning at both ends lets you precisely tune end-stop deceleration for fast-moving payloads.
| Model | AirTAC SE100X500S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushing filled cartons onto a palletizer bed requires high force over a long reach; the 3927 N push at 0.5 MPa easily handles heavy shrink-wrapped stacks.
Ejecting large molded plastic parts from a 500-ton press demands a 500 mm stroke and robust 801 kgf peak force to safely strip the tooling.
Forming thick sheet metal relies on the 100 mm bore's 5497 N push at 0.7 MPa, while the FTC trunnion mount absorbs angular moments during the stroke.
If your assembly requires less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa, while moving up to the 125 mm bore provides a 6136 N push for heavier loads. Because this is a 500 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral stress; always pair this cylinder with an external guide rail to prevent rod-bearing damage. Remember that the adjustable air cushion only softens the end-of-stroke impact—it cannot hold a load if air pressure drops. For position holding, you need a BSE rod lock. This FTC center-trunnion mount variant is dimensionally interchangeable with any ISO 15552 cylinder, simplifying retrofits.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force reaches 5497 N. The maximum allowable push force is 801 kgf at 1.0 MPa.
Yes, the SE100X500SFTC is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing mounting hardware using the FTC center-trunnion interface and PT1/2 port without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.