The AirTAC AirTAC SE100X500SH ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500SH is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty motion tasks. It generates a substantial 3927 N push force at 0.5 MPa and features a 500 mm stroke. Equipped with a Viton (FKM) seal, this variant reliably operates in extreme thermal environments up to 150 C, outperforming standard elastomers in high-heat industrial setups.
The extruded aluminum barrel lacks external tie rods, yielding a clean, corrosion-resistant profile that mounts flush against machinery frames. Integrated sensor grooves across three sides accept CMSE reed and DMSE electronic switches via the built-in -S magnet, while field-adjustable air cushioning at both ends softens hard end-of-stroke impacts.
| Model | AirTAC SE100X500SH ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes heavy molded plastic parts out of hot tooling, leveraging the 3927 N extend force and Viton seal to withstand ambient radiant heat up to 150 C.
Actuates a 500 mm swing arm to reroute heavy pallets on a packaging line, relying on the adjustable end cushions to absorb the kinetic energy of the shifting load.
Advances heavy steel blanks into a stamping press over the 500 mm stroke, using the no-tie-rod profile to mount flush within a confined die-loading area.
Selecting this 100 mm bore makes sense when the neighboring 80 mm cylinder (2513 N push at 0.5 MPa) is underpowered, but you want to avoid jumping to the massive 125 mm unit (6136 N push). Because the stroke is 500 mm, the 25 mm rod and M20x1.5 thread endure significant bending moments under side loads; always pair this length with an external guide rail to prevent premature rod-bearing wear.
Remember that the adjustable pneumatic cushioning only decelerates the piston near the stroke ends and does not lock the load. If your process drops air pressure, the rod will drift; for strict position-holding, integrate an external pilot-operated check valve or specify a BSE rod-lock cylinder. Dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other ISO 15552 cylinders, utilizing the standard PT1/2 port.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force reaches 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates at speeds ranging from 30-800 mm/s.
Yes, the SE100X500SH is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders. It shares the standardized mounting interface and PT1/2 port size, though you must use AirTAC CMSE or DMSE sensors for the built-in magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.