The AirTAC AirTAC SE100X50S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X50S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The integrated sensor grooves on three sides of the profile body allow flexible switch placement, while the field-adjustable air cushioning at both stroke ends can be precisely tuned to absorb the kinetic energy of high-mass loads hitting the end caps.
| Model | AirTAC SE100X50S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of push at 0.5 MPa to eject heavy stamped metal blanks from a hydraulic press bed, utilizing the short 50mm stroke for rapid, repetitive cycling.
Applies up to 801 kgf of clamping force to hold thick steel plates firmly in place during a multi-roller straightening process, ensuring zero deflection under load.
Secures the moving half of a mid-sized plastic injection mold tool, relying on the 3681 N pull force at 0.5 MPa to safely retract the heavy mold platen.
Selecting this 100mm bore cylinder makes sense when your application requires substantial thrust, generating 3927 N of push at 0.5 MPa and up to 801 kgf at 1.0 MPa. If your load demands less force, stepping down to the 80mm bore yields 2513 N of push at 0.5 MPa, saving valuable space and air consumption. Conversely, if you need maximum thrust, stepping up to the 125mm bore provides 6136 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder does not hold its position if air pressure drops or the valve centers; the piston will drift. For critical load-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. To replace an existing cylinder, match the 100mm bore, 50mm stroke, PT1/2 port, and mounting accessory.
Quick checklist
The SE100X50S has a 100mm bore and uses a PT1/2 port. At 0.5 MPa it generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa the push force is 5497 N, and the maximum push force is 801 kgf at 1.0 MPa.
Yes, the SE100X50S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders by matching the 100mm bore, 50mm stroke, and mounting hardware. The built-in magnet also allows you to use AirTAC CMSE reed or DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.