The AirTAC AirTAC SE100X50SLB ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X50SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa and up to 801 kgf at 1.0 MPa. It features an LB foot mounting orientation and a built-in magnet (S) for position sensing. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while retaining high structural rigidity.
This 100mm bore, 50mm stroke unit is highly adaptable, offering field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts even at high travel speeds. The integrated magnet flawlessly supports AirTAC CMSE reed and DMSE electronic sensors, sliding directly into the three-sided sensor grooves for rapid installation. It is dimensionally interchangeable per ISO 15552, allowing seamless retrofitting into existing standard footprints.
| Model | AirTAC SE100X50SLB ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 3927 N push force at 0.5 MPa needed to eject dense stamped metal parts from a hydraulic press bed within a rapid 50mm stroke.
Utilizes the LB foot mount to securely separate heavy injection mold halves, relying on the robust 100mm bore to overcome initial vacuum and friction breakaway.
Acts as a high-force stopper gate on a heavy-duty roller conveyor, using the built-in magnet and DMSE sensor to confirm the blocking position to the PLC.
Selecting the SE100X50SLB is optimal when your application requires substantial thrust within a short 50mm travel. If you need to step down force to save space and air consumption, the adjacent 80mm bore yields 2513 N push at 0.5 MPa. Conversely, if your load demands even greater power, the 125mm bore provides 6136 N push at 0.5 MPa. Because this is a double-acting cylinder, it does not hold its position if air pressure is lost or the valve centers; for load-holding safety, consider the BSE rod lock variant. The LB foot mount secures the cylinder body rigidly for direct in-line thrust, and the PT1/2 port handles the high airflow required for the 100mm bore.
Quick checklist
This 100mm bore cylinder delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It features a PT1/2 port, a 25mm rod with an M20x1.5 thread, and operates at speeds of 30-800 mm/s.
Yes, it is dimensionally interchangeable with any ISO 15552 profile cylinder, matching standard mounting and LB foot bracket dimensions exactly. The field-adjustable air cushioning at both ends uses a needle screw to tailor exhaust flow, decelerating the piston near the stroke ends to prevent hard mechanical impacts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.