The AirTAC AirTAC SE100X50SN ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X50SN is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from workshop debris.
This 100mm bore unit integrates a built-in magnet for CMSE and DMSE position sensing, alongside NBR seals suited for standard operating temperatures. Field-adjustable air cushions at both stroke ends allow technicians to tune end-of-stroke deceleration, preventing hard mechanical impacts during high-speed 50mm retract and extend cycles.
| Model | AirTAC SE100X50SN ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Supplies 3927 N of thrust at 0.5 MPa to shear excess flash from die-cast aluminum engine blocks in automated machining cells.
Uses its 50mm stroke to rapidly compact corrugated cardboard layers within case erectors before strapping.
Drives rigid tooling to press heavy-duty industrial bearings into cast iron housings without deflection.
Selecting this 100mm bore model provides 3927 N of push force at 0.5 MPa, making it highly effective for short-stroke pressing and heavy clamping. If your application requires less force, the 80mm bore neighbor offers 2513 N push, whereas stepping up to the 125mm bore yields 6136 N for heavier loads. Because this is a double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; for dead-load holding, consider an external pilot-operated check valve or the BSE rod-lock variant.
For an ISO 15552 dimensional retrofit, match the 100mm bore, 50mm stroke, PT1/2 port, and your required mounting accessory. The integrated -S magnet enables drop-in compatibility with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
This 100mm bore cylinder features a PT1/2 port and a Ø25mm rod. It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa.
Yes. The SE100X50SN is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and hole patterns as competing ISO 15552 profile cylinders for direct drop-in retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.