The AirTAC AirTAC SE100X55 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 55mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X55 is a double-acting single-rod ISO 15552 profile cylinder with a 100 mm bore and 55 mm stroke. It generates 3927 N of push force at 0.5 MPa and up to 801 kgf at 1.0 MPa, making it well-suited for heavy-duty actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames.
This unit features field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly at the stroke limits. It uses a PT1/2 port and a 25 mm rod with an M20x1.5 thread. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | AirTAC SE100X55 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push force to secure injection mold halves during plastic injection molding operations.
Drives the upper beam in a hydraulic press brake, relying on the 55 mm stroke for rapid approach.
Raises and lowers a heavy stopper gate on a pallet conveyor line, using the 801 kgf max force to resist impact.
This 100 mm bore provides 3927 N push at 0.5 MPa. If your assembly requires less force, stepping down to an 80 mm bore yields 2513 N push. If you need more power, the 125 mm bore offers 6136 N push. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops; apply an external BSE rod lock for fail-safe holding. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting hardware.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa.
Yes, the SE100X55 is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 cylinders while retaining existing mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.