The AirTAC AirTAC SE100X550 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 550mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X550 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It features a 100 mm bore and a 550 mm stroke, generating 3927 N of push force and 3681 N of pull force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a flush exterior that resists corrosion and simplifies direct mounting against machine frames.
This unit lacks a built-in position magnet, meaning it ships without a sensor on this SKU. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed cycling. The integrated profile design ensures true ISO 15552 dimensional interchangeability for seamless retrofits.
| Model | AirTAC SE100X550 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of push at 0.5 MPa to actuate heavy pneumatic flap diverters on high-throughput end-of-line palletizing machines, utilizing the 550 mm stroke to clear large load profiles.
Drives 3681 N of retract force to eject thick sheet metal blanks from a hydraulic press brake bed, where the adjustable cushion absorbs kinetic energy during rapid 30-800 mm/s cycling.
Applies up to 801 kgf of clamping force at 1.0 MPa to secure heavy chassis components in robotic spot welding cells, leveraging the tie-rod-free profile for flush mounting against tooling plates.
Generating 3927 N of thrust at 0.5 MPa, this 100 mm bore fits mid-to-heavy industrial loads. If your application requires less force, the 80 mm bore provides 2513 N of push at 0.5 MPa, whereas stepping up to the 125 mm bore yields 6136 N for heavier masses. Because this is a 550 mm stroke, the unsupported rod length increases bending moments on the front cover bearing under lateral loads; utilizing an external guide mechanism is strongly recommended to prevent premature wear.
As a standard double-acting cylinder, the SE100X550 does not hold its position or resist drifting when air pressure is removed or a valve centers. For applications requiring mid-stroke locking, consider the BSE rod-lock variant. To replace an existing ISO 15552 cylinder, match the 100 mm bore, 550 mm stroke, PT1/2 port, and your required mounting accessory.
Quick checklist
At 0.5 MPa, the SE100X550 generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
It is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing identical mounting footprint and PT1/2 port locations for drop-in retrofits. However, it is a standard double-acting cylinder; it will not hold a load if air is lost. For fail-safe holding, use a BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.