The AirTAC AirTAC SE100X570S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 570mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X570S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, absorbing kinetic energy smoothly across the 570 mm travel. Because this is a standard double-acting actuator, it relies on continuous air pressure to hold a load; if air is lost, the piston will drift, requiring an external rod lock for fail-safe holding.
| Model | AirTAC SE100X570S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa needed to positively eject heavy stamped metal panels from a 570 mm deep press die.
Handles large-format pallets on a packaging line, using the 570 mm stroke to extend a diverter arm and reroute heavy unit loads.
Extracts hot plastic components from deep injection molding tools, relying on the DMSE sensor signal to confirm full part ejection.
Selecting this 100 mm bore provides 3927 N push at 0.5 MPa. If your application requires less force, stepping down to the 80 mm bore yields 2513 N push; conversely, scaling up to the 125 mm bore provides 6136 N push for heavier payloads. As a dimensionally interchangeable ISO 15552 unit, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the 100 mm bore, 570 mm stroke, PT1/2 port, and standard mounting accessories.
With a 570 mm stroke, the 25 mm rod and internal bearing face increased bending moments from any side loads. For optimal seal life and to prevent rod scoring, always guide the load externally to prevent cantilevered forces from stressing the cylinder body.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the cylinder features field-adjustable air cushioning at both ends. You can tune the needle screw to decelerate the piston smoothly over the 36 mm cushion length, preventing hard end-stop impacts when moving heavy loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.