The AirTAC AirTAC SE100X5S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 5mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X5S is a double-acting single-rod ISO 15552 profile cylinder engineered for high-force, short-stroke tasks. It delivers a robust 3927 N push at 0.5 MPa, utilizing a 100 mm bore and a 5 mm stroke to execute rapid, heavy-duty movements within a highly confined footprint.
The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. Equipped with a built-in magnet (S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable air cushioning at both ends allows technicians to dial in the exact deceleration rate needed to absorb kinetic energy without rigid impact.
| Model | AirTAC SE100X5S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 3927 N push force to eject heavy stamped metal parts from tight press dies, relying on the 5 mm stroke for rapid, localized ejection without overtravel.
Provides high clamping pressure in automated automotive spot welding guns, where the short 5 mm stroke brings electrodes into immediate contact for rapid cycle times.
Drives heavy sealing jaws on automated pallet wrapping lines, utilizing the built-in S magnet and DMSE sensors to confirm jaw closure on thick stretch film.
Selecting this 100 mm bore is ideal when substantial thrust is required in a very compact actuation distance. If your application requires slightly less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa. Conversely, scaling up to the 125 mm bore provides a massive 6136 N push, though it reduces the maximum operating speed to 30-500 mm/s compared to this unit's 30-800 mm/s range. Because the 5 mm stroke is extremely short, rod-bearing bending is negligible, negating the need for external guides.
As a true ISO 15552 profile cylinder, the SE100X5S is dimensionally interchangeable with other ISO 15552 cylinders, making it a drop-in replacement for retrofits. It features a PT1/2 port, a 25 mm rod with an M20x1.5 thread, and uses standard mounting accessories. Note that while the adjustable cushions soften end stops, a plain SE cylinder cannot hold a load vertically without live air pressure; for position holding, explore the BSE rod lock variant.
Quick checklist
The SE100X5S delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE100X5S is a profile cylinder with a standardized ISO 15552 / VDMA 24562 mounting interface, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses the same mounting hardware and port sizes (PT1/2) for seamless retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.