The AirTAC AirTAC SE100X60 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X60 is a double-acting single-rod ISO 15552 profile cylinder built for heavy-duty positioning. It generates a substantial 3927 N push at 0.5 MPa, utilizing a 25 mm rod and a PT1/2 port to cycle a 60 mm stroke efficiently.
Its square extruded aluminum barrel removes external tie rods entirely, yielding a flush, corrosion-resistant body that mounts cleanly in tight spaces. The field-adjustable pneumatic cushioning at both ends lets you dial out harsh end-of-stroke impacts, and because this specific SKU lacks the -S magnet, you will need to specify a sensor-ready variant if position feedback is required.
| Model | AirTAC SE100X60 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Applies 3927 N of push force at 0.5 MPa to secure heavy injection mold halves within a 60 mm travel range.
Ejects formed sheet metal parts from a mechanical press, using its adjustable end cushions to soften the 60 mm return stroke.
Folds heavy cardboard flaps on outbound pallets, leveraging the 100 mm bore's 5497 N push at 0.7 MPa for stiff materials.
Choosing this 100 mm bore makes sense when your application demands high force; if you need less push, stepping down to the 80 mm bore yields 2513 N at 0.5 MPa, while moving up to the 125 mm bore provides 6136 N. The 60 mm stroke keeps the assembly compact without risking the rod-bearing bending seen in longer unsupported lengths. As a standard ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessories, PT1/2 ports, and a 25 mm rod thread. Remember that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops.
Quick checklist
At 0.5 MPa, the SE100X60 delivers 3927 N of push and 3681 N of pull. At 0.7 MPa, the push increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, its profile body is dimensionally interchangeable per ISO 15552, matching standard mounting hardware and PT1/2 ports. This specific SKU does not include a position magnet (-S), so it cannot host CMSE or DMSE sensors without modifying the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.