The AirTAC AirTAC SE100X600S ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X600SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It generates a substantial 3927 N push force at 0.5 MPa, extending a generous 600 mm stroke to drive large mechanisms. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from snagging.
Equipped with a built-in magnet for CMSE and DMSE position sensing, this 100 mm bore unit integrates seamlessly into automated feedback loops. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at high speeds. It utilizes a PT1/2 port and a 25 mm hard-chrome rod to handle demanding cycles.
| Model | AirTAC SE100X600S ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy welding guns on an automotive assembly line, using the 3927 N push force to clamp steel panels securely at the 600 mm extended position.
Actuates large diverter arms on a heavy-duty packaging conveyor, relying on the FTC trunnion mount to handle the rotational moment of routing loaded pallets.
Folds and secures large corrugated cartons in a high-speed packaging machine, utilizing the adjustable cushion to soften the 600 mm stroke when slamming the heavy forming plate.
Selecting this 100 mm bore cylinder makes sense when your application requires pushing forces around 3927 N at 0.5 MPa or up to 801 kgf at 1.0 MPa. If you need less force and want a smaller footprint, stepping down to the 80 mm bore drops the 0.5 MPa push to 2513 N. Conversely, if your load demands even more power, the 125 mm bore increases the 0.5 MPa push to 6136 N. Because this model carries a 600 mm stroke, the 25 mm rod and internal bearing face bending stresses under side loading; for rigid support over this long extension, incorporate an external guide rail to prevent premature seal wear.
This model includes an FTC centre trunnion mounting accessory and a built-in sensor magnet. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for any standard ISO 15552 cylinder, sharing identical mounting interface dimensions for rapid retrofitting. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device, so an external rod lock or pilot-operated check valve is required to hold a load safely without live air pressure.
Quick checklist
This 100 mm bore cylinder provides a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X600SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the PT1/2 port and FTC mounting dimensions exactly without altering your machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.