The AirTAC AirTAC SE100X600STC ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X600STC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies bracket alignment and reduces debris buildup in demanding environments.
Equipped with a built-in magnet for CMSE and DMSE position sensing, this 100mm bore unit utilizes a PT1/2 port and a Ø25 mm piston rod. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads across its 600mm travel.
| Model | AirTAC SE100X600STC ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of push at 0.5 MPa to positively eject heavy stamped metal panels from a hydraulic press bed across a 600mm reach.
Utilizes the TC trunnion mount to pivot a heavy-duty routing gate, deflecting loaded pallets onto a secondary packaging line.
Actuates a large mold core over 600mm with adjustable air cushions to soften the mechanical stop at high cycling speeds.
Choosing this 100mm bore involves balancing substantial thrust with physical space. If your application requires less force, stepping down to the 80mm bore yields 2513 N push at 0.5 MPa, while moving up to the 125mm bore provides 6136 N push. This SE100X600STC variant includes a TC centre trunnion mount, which is ideal for distributing lateral stress on long-stroke pivoting loads, alongside the -S magnet for electronic tracking.
Because this model features a 600mm stroke, the extended rod is susceptible to bending under heavy side loads; an external guide rail should be fitted to prevent premature rod-bearing wear. Note that the adjustable cushion only decelerates the piston near stroke end and does not hold the load—if air pressure is lost, the cylinder will drift, requiring a BSE rod lock for secure positioning. As a dimensionally interchangeable ISO 15552 component, it serves as a direct drop-in replacement for other ISO 15552 cylinders, sharing standard mounting hardware and footprint dimensions.
Quick checklist
At 0.5 MPa, this 100mm bore cylinder generates 3927 N of push and 3681 N of pull. At 0.7 MPa, the push force increases to 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE100X600STC is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the standard bore, 600mm stroke, PT1/2 port, and TC mounting dimensions exactly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.