The AirTAC AirTAC SE100X60H ISO 15552 Cylinder | 100mm FKM is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X60H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 3927 N push force at 0.5 MPa (5497 N at 0.7 MPa) across its 60 mm stroke. Because this SKU uses an FKM (Viton) seal instead of standard TPU, it withstands sustained operating temperatures up to 150 C, making it highly suitable for hot end-of-process manufacturing lines.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor bracket installation. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops when cycling at speeds up to 800 mm/s. Note that this specific configuration does not include a built-in position sensing magnet.
| Model | AirTAC SE100X60H ISO 15552 Cylinder | 100mm FKM |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the high-temperature ambient air near injection molding platens, using its 3927 N push force to safely eject dense plastic components.
Feeds heavy-gauge metal sheet into a hot stamping press, utilizing the FKM seal to survive the radiant heat and short 60 mm stroke for rapid indexing.
Actuates heavy access doors on industrial drying ovens, where the 150 C FKM seal integrity prevents degradation from constant thermal exposure.
When sizing this 100 mm bore actuator, compare its 3927 N push at 0.5 MPa against your actual load requirements. If your application demands less force, stepping down to an 80 mm bore yields 2513 N of push, whereas scaling up to a 125 mm bore provides 6136 N for heavier mechanisms. As a true ISO 15552 cylinder, this model serves as a drop-in dimensional replacement for other ISO 15552 profile cylinders, sharing standardized mounting interfaces and port sizes (PT1/2) for straightforward retrofits.
Because the 60 mm stroke is relatively short, the 25 mm rod and M20x1.5 thread provide excellent rigidity against side loading. Remember that a standard double-acting cylinder relies on live air pressure to hold its position; if air is lost or the valve is centered, the piston will drift. For applications requiring true position holding without continuous pressure, consider the AirTAC BSE rod-lock variant.
Quick checklist
The SE100X60H generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum drive force is 801 kgf at the maximum operating pressure of 1.0 MPa.
No, the SE100X60H is a standard double-acting cylinder and does not hold its position or load when air is exhausted or the valve is centered; the piston will drift. Additionally, its adjustable air cushioning only decelerates the piston near the stroke end and does not act as a brake or lock. For true position holding, you would need an external rod lock or the AirTAC BSE variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.